Skip to content

Hi-Spec 45 Piece 8V Cordless Power Screwdriver with Drill Driver Bits Accessory Set. 1300mAh Li-Ion Battery & LED Light. For Screwing, Fastening & DIY Light Drilling of Wood & Plastics


Available on Amazon UK

  • ♦ ELECTRIC POWERED DIY: Save time and effort in DIY power screw-driving and light material drilling with the Hi-Spec 45 Piece 8V Cordless Power Screwdriver with Drill Driver Bits Accessory Set. Rapidly tighten and loosen common screws and fasteners, and churn through soft woods and plastics with the range of bits. For everyday DIY fixing and repair tasks, opening appliances, installing fixtures and fittings, putting up shelves and frames, and assembling furniture at home, the office and workshop
  • ♦ POWER AT HAND: Easy to hold with a contoured rubberised grip, the Hi-Spec 45 Piece 8V Cordless Power Screwdriver, has upto 10Nm of turning torque for those stubborn and stuck screws, a forward and reverse direction switch for tightening and unfastening, and a variable speed trigger for controlled screwdriving or rapid light drilling of upto 550RPM. Its Li-ion 1300mAh battery charges fully in 3-5 hours, with the included mains charger, and a handy front bright LED illuminates the work area
  • ♦ INSERT & GO BITS: Just insert the driver bit and tighten the 10mm 3/8” keyless chuck head of the Hi-Spec 45 Piece 8V Cordless Power Screwdriver and its ready for work. Their 6.35mm / 1/4" hex shanks are designed for rapid change out and reduces slipping as compared to standard round shanks. The 15+1 torque slip control ring automatically disengages the drive gears if too much torque is applied for small screws preventing over-tightening, screw stripping and over-drilling into light materials
  • ♦ S2 HARDENED STEEL: The driver bits are sand-blasted and heat treated from S2 Shock-resisting steel alloy. The addition of silicon gives increased tempered hardness and wear-resistance with Rockwell C Hardness of 60 as compared to ordinary Cr-V bits. The 5 piece carbon steel Brad point drill bits, for soft wood and plastic drilling, have piercing or centering tips for accurate drilling starts and their sharpened edges cut & churn out soft materials quickly and cleanly
  • ♦ BITS & MORE BITS: 30pc 25mm Bits: Philips PH1, 1, 2, 2, 3, 3; Slotted SL1/8, 5/32, 3/16, 7/32, 1/4, 1/4"; Pozidriv PZ1, 2, 3; Square SQ#1, 2, 2, 3; Hex H1/8, 5/32 3/16, 1/4; Torx T10, 15, 20, 25, 27, 30, 40; 8pc 50mm: PH1, 2, 3; SL5/32, 3/16, 7/32, 1/4"; SQ#2; 5pc Wood Drill Bits: 1/8, 5/32, 3/16, 1/4, 5/16"; 1pc Magnetic bit connector for power tools; extra double-headed bit PH2/SL7