Skip to content

Hi-Spec 39 Piece SAE & Metric Tap and Die Set. DIY Tapered & Plug Hand Tapping, Cutting, Threading, Forming, & Chasing Kit for the Garage & Workshop

$39.99

Product Description

Hi-Spec 39 Piece SAE & Metric Tap and Die Set. DIY Tapered & Plug Hand Tapping, Cutting, Threading, Forming, & Chasing Kit for the Garage & Workshop

TAPPING/CUTTING, THREADING/FORMING & CHASING

Straightforward DIY hand tapping, threading, and chasing with clean-cut results for DIY jobs in garages, and workshops. Most common SAE and Metric sizes make sure you stay covered.

Milled from high quality alloy steel these taps and dies, with accurate usage and cutting oils, will tap and thread typical metals such as carbon and alloy steel, cast iron, aluminum, brass and bronze. Start tapping easily, either cutting new material or chasing lightly damaged threads e.g. old screws, spark plugs, rust affected nuts and bolts.

Extra Accessories

The Hi-Spec Tap & Die set includes extra accessories for tool preparations and measurement

  • 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread:
  • 13 to 40 TPI SAE
  • 0.5 to 1.75 Metric
  • Mini-Screwdriver to assemble and fix the dies into the turning wrench

17 Piece Tapered & Plug Taps

Three and four flute plug taps with tapered coarse and fine threads. The tapered cutting edges assist in aligning and starting the tap into an untapped hole.

  • GCr15 Alloy steel. A high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance
  • 8 x Taper Taps:
  • SAE: #4-40, #6-32, #8-32, 1/4-20
  • Metric: M3x0.5, M4x0.7, M5x0.8, M6X1.0
  • 9 x Plug Taps:
  • SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27)
  • Metric: M7x1.0, M8x1.25, M10x1.5, M12x1.75

17 Piece Dies

Dies to cut or form matching screws and bolts.

  • GCr15 Alloy Steel. A high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance
  • 17 x Dies:
  • SAE: #4-40, #6-32, #8-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 1/8-27(NPT)
  • Metric: M3x0.5, M4x0.7, M5x0.8, M6X1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75

Read more

T-Handle Tap Wrench

For the smaller taps

  • 6cm / 2-3/8" long
  • Nickel-plated #45 Carbon Steel Body
  • With knurled tightening ring

Adjustable Tap Wrench Handle

For the larger taps

  • M3 to M12 & 1/16 to 1/2"
  • 19.5cm / 7-11/16" long
  • Zinc alloy body, carbon steel holding blocks, A3 steel chrome-plated handles

Die Wrench Handle

For turning the dies

  • M25 / 1"
  • 20.0cm / 7-7/8" long
  • Zinc alloy body, carbon steel holding blocks, A3 steel chrome-plated handles

Read more

The Hi-Spec DIY Tools Range

For DIY home improvement and maintenance projects, the right tools save valuable time and costs. The Hi-Spec DIY Tools range is for all people looking for a combination of easy usability and great value. Whether repairing, decorating, remodelling or crafting, Hi-Spec is committed to offering quality and affordable DIY tools that encompass an entire scope of hand tools, power tools, and toolkit sets

61 Piece Screw Driver Bits & Ratchet Handles Set 101 Piece Screw Driver Bits & Ratchet Handle Set. Tamper-Proof Security Types 108 Piece Driver Bits, Sockets & Handles Set 128 Piece Screw Bits & Nut Driver Tool Kit Set 6 Piece Manual Hand Impact Driver Set 39 Piece SAE & Metric Tap and Die Set
Security/Tamper-Proof Bits
Dedicated Ratcheting Screw Bit Handle
Includes Sockets
  • CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the Hi-Spec SAE & Metric Tap and Die Tool Set. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a tool box tray case
  • 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12. 9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12
  • METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Hi-Spec Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminium, brass and bronze
  • THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Hi-Spec Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads. Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece
  • ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. Items are neatly organised in a slimline case for easy access and packing in a tool box or storage on a shelf